Back to top
Send SMS Send Inquiry

Brass Compression Fitting

Brass Compression Fitting
Brass Compression Fitting
Send Inquiry
Product Code : 13
Brand Name : KITEC INDUSTRIES
Product Description

After gaining affluent domain understanding and knowledge of 10 years in the industry, we are engaged in providing Brass Compression Fitting. This fitting is used in electrical conduit systems for joining thin-walled pipes or two tubes together. It is offered to our clients in varied sizes to meet their varied needs. The provided fitting is manufactured at our well-maintained manufacturing unit under the stern observation of our professionals by making use of quality tested brass and contemporary machines. This Brass Compression Fitting can be easily availed from us at reasonable prices.

Features:

 

  • Ruggedness

  • Light weight

  • Perfect finish

  • Leak free sealing

PHYSICAL PROPERTIES:

Malleable: The unique feature of KiTEC is it's malleability. KiTEC is easily formed into curves, can be set by hand and may require only bending springs when forming tight bends down to radius equivalent 5 times the diameter of pipe. Unlike plastic plumbing pipes, KiTED permanently holds whatever shape It is formed into and does not need additional clips or brackets to retain the shape of bends or curves.

Non-corrosive; KiTEC piping systems don't corrode. Will never pit or develop pin holes from aggressive water leading to premature failure.

Smooth surface: That results in avoiding permanent scale build up avoiding reduction in flow. Soluble encrust-ants, such as calcium carbonate do not readily precipitate onto the smooth walls of KiTEC pipes. In additional there is no reduction in flow coefficients as the pipe ages.

Hygiene: KiTEC is hygienic, no-toxic, rust-free and eliminates growth of microorganisms. This avoids contamination of water. KiTEC pipes have passed all the pipe for potable water in accordance with British Standard BS 6920 by the British Water Quality Center.

Flame/Smoke Rating: KiTEC pipe has a Flame Spread of 5 and a smoke Development of 5 as per ULC-S102.2. The ratings meet most building code requirements allowing the use of KiTEC in high-rise construction as well as in return plenums and vertical shafts.

Permeation: KiTEC aluminum core acts a permeation barrier against entry of contaminants and limits oxygen permeation to zero. Permeation is the molecular transport of gaseous chemicals, from the soil surrounding the pipe through the pipe wall and into the fluid being carried. Permeation may have adverse effects on the piping system, the conveyed fluid through the pipe wall and into the fluid being carried. Permeation may have adverse effects on the piping system, the conveyed fluid or both. KiTEC is widely used for the transmission and distribution of potable water providing a second line of defense for the plumbing system.

UV Resistance and Opacity: KiTEC pipes fo not have any effect of UV radiation when laid exposed. There is no light transmission through the wall of KiTEC pipe.

THERMAL PROPERTIES

Thermal Expansion: KiTEC has low coefficient of linear similar to copper tubing and is far superior to alternate plastic pipe (expansion// contraction rate about 10% of plastic pipe). This eliminates the need of installation “offsets” and the concern about abrading pipe due to constant movement as a result of temperature changes. Straight runs are always attainable with KiTEC pipe. Coefficient of Thermal Expansion is : 25*10-6/°K. Low expansion coefficient is due to tie layer which eliminated the differential expansion of plastic and metal.

Resistance to freezing: In continuous flowing plumbing and water supply applications, KiTEC can withstand multiple cycles of freezing the thawing while under pressure without bursting up to-40°C temperature. Thawing can be done using a hot air blowgun, hot water injection and electric blanket or heating cable method. An open flame, torch or electric current should not be used to thaw the pipe.

Thermal Insulation: KiTEC is having Thermal conductivity of 0.43 Watt/{m °K}. KiTEC composite pipes proved an increased resistance to the onset of condensation or pipe sweating in a plumping application. In case of hot water piping, the insulation requirement is only 50% the same required for conventional metal pipes.

CHEMICAL RESISTANCE

Resists at 20° as well as 60°C.: Acids, Alcohol, Aldehyde, Ethylene Glycol, Bleach, Corrosion inhibitors, Detergents, Foodstuff, Petrol, Diesel, Fuel Oils, Veg/Mineral Oils.

Resists at ambient temperature. Performance yet to be ascertained at elevated temperatures. Beverages, Insecticides, Ketones, Oxidation agents, Paints, Salts, Surfactants/Soaps

Chlorine Resistance: KiTEC pipe has much better resistance to chlorine attack than other non-composite layer is not exposed to chlorine. Therefor, there is no reason an excellent choice for continuous re-circulation plumbing applications.

KiTEC Composite PR Pipes


As per IS 15450:2004

Description

Pipe size

1014

1216

1620

2025

2532

3240

4050

Minimum Outside Diameter (mm)

14

16

20

25

32

40

50

Minimum Wall Thickness(mm)

1.70

1.75

2.00

2.45

2.80

3.40

4.00

Standard Coil Length (Meters)

200

200

200

100

10

100

100

Minimum Aluminum Thickness (mm

0.20

0.20

0.25

0.25

0.30

0.30

0.30

Minimum Outside Layer Thickness (mm

0.40

0.40

0.40

0.40

0.40

0.40

0.40

Maximum Weight (Kgs/Meter)

0.10

0.12

0.16

0.23

0.35

0.52

0.68

Equivalent NB Size GI (Inch)

3/8

½

¾

1

1 ¼

1 ½

2

KiTEC Composite PR Pipes are having pressure rating of 13.8 Kg/Cm² and 11.0 Kg/Cm² at 60°C. Short term excursion to 95°C will not affect the overall performance. Designed life span of KiTEC piping System is in excess of 50 years. The pipe are black in color and are UV resistant. Can be used for outdoor as well as concealed installations.

KiTEC Composite PL & PE-AL-PEX Pipes

As per Internal Standard

Description

Pipe Size

1216

1620

2025

2532

3240

4050

5063

6375

7590

90110

Minimum Outside Diameter (mm)

16

20

25

32

40

50

63

75

90

110

Minimum Wall Thickness (mm)

1.70

1.90

2.30

2.90

3.40

3.90

4.80

5.80

6.80

7.00

Standard Coil/Pipe Length (Meters)

200

200

100

100

100

100

50

50

6

6

Minimum Outside Layer Thickness (mm)

0.17

0.17

0.19

0.23

0.23

0.23

0.60

0.60

0.70

0.80

Maximum Weight (Kgs/Meter)

0.40

0.40

0.40

0.40

0.40

0.40

0.40

0.50

0.50

0.50

Equivalent NB Size (Inch)

0.13

0.17

0.24

0.35

0.52

0.70

1.27

1.70

2.00

2.65


½

¾

1

1 ¼

1 ½

2

2 ½

3

3 ½

4

KiTEC Composite PL Pipes are having inner layer in natural colour and outer layer in black colour with continuous blue line on outer layer and are UV resistant. KiTEC Composite PL pipes are having pressure rating of 12.0Kg/Cm² at 23°C and 6.0Kg/Cm² at 65°C and being used for outdoor as well as concealed installations. These pipes offer the cost benefit of traditional plumbing systems without compromising the basis features of composite pipes.

KiTEC Composite PL-AL-PEX Pipes are manufactured having inner layer form PEX a new class of Polyethylene materials designated as PEX (Cross Linked Polyethylene). With the improved property at elevated temperature, KiTEC composite PE-AL-PEX pipes are suitable for applications having continuous operating temperature of 95°C at 5.0 Kg/Cm². Rated pressure at 80°C temperature is 8.0 Kg/Cm². Short term excursions to 110°C will not affect the overall performance of these pipes. The pipes are be used for outdoor as well as concealed installations.

KiTEC Composite PE-AL-PEX pipes are manufactured as per internal standards and meets the requirement for industrial/domestic purposes and heating installations.



KITEC INDUSTRIES (INDIA) PVT. LTD.
X


KITEC INDUSTRIES (INDIA) PVT. LTD.
C18 / 11, Jeevan Dharm, Jeevan Bima Nagar, Borivali West, Mumbai - 400103, Maharashtra, India
Mr. P. R. Mannadiar (Executive Assistant to M. D)