Back to top
Send SMS Send Inquiry

Multi Floor Trap- MFT

Multi Floor Trap- MFT
Multi Floor Trap- MFT
Send Inquiry
Product Code : K2
Product Description
As is our philosophy to offer technically correct products to the customer, KiTEC has developed a Floor Trap meeting all the requirements of international standards. Based on our research and interaction with the experts it was realized that apart from connecting the waste water to drain line the trap also acts as a safety measure avoiding harmful gases to enter the room.

The design is based on the principle that the trap shall have a liquid a seal of not less than 50mm and not more that 65mm. The water seal that forms the trap barrier is the maximum vertical dept of liquid that a trap will retain. It is measures between the crown weir and the top of the dip of the trap. A water seal of not less than 50 mm and not more that 65 mm was found to be the optimum depth to provide the necessary protection against sewer gas and still provide the self- scouring effect needed to keep the trap from fouling. A trap with less than 50 mm of seal depth offers less resistance to self- siphon age and more readily loses its seal by evaporation. Obviously the grater the seal the depth, the opposite is proportionately true. The product is suitable for use on all types of draining installations including "Single Stack" and "One-Pipe Fully Vented Systems"

KITEC INDUSTRIES (INDIA) PVT. LTD.
X


KITEC INDUSTRIES (INDIA) PVT. LTD.
C18 / 11, Jeevan Dharm, Jeevan Bima Nagar, Borivali West, Mumbai - 400103, Maharashtra, India
Mr. P. R. Mannadiar (Executive Assistant to M. D)